Informace o výrobku

T-REX 500E PRO DFC Super Combo

kód produktu:RH50E01X
výrobce:ALIGN
715.21€
Zdarma!
T-REX 500E PRO DFC Super Combo

Klikněte na fotografii pro zvětšení

small_photosmall_photosmall_photosmall_photosmall_photosmall_photosmall_photosmall_photosmall_photosmall_photosmall_photo
KOMPLETNÍ POPIS


 TREX 500 Pro DFC Super Combo - Align-Heli-RH50E01XW



Features of the Trex 500 Pro DFC :
● Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, providing the most direct and precise control feel back to the pilot, and exhibits exhilarating 3D performance and unimaginable flight speed.
● Unique carbon composite technology which effectively strengthen the weak areas and simplify electronics installation. 
● Servos can be mounted directly onto frame without mounting nuts. 
● Rear in-frame rudder servo mount design for centralize 3G for best 3D performance. 
● Equipped with MX series high efficiency brushless motor, with heatsink style casing and embedded fan to dramatically improve cooling and increase power output. 
● Unique fast release gyro and receiver mount design for fast removal and sturdy attachment. 
● Uses high precision slant tooth (helical) main gear, with higher load sustainability and lower noise output. 
● Brand new tail gear box with higher material quality and easy maintenance. 
● High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision. 
● Highly efficient shaft driven tail system which effectively reduce power loss found on belt driven system, and at the same time increase performance during flight. 
● Brand new 4mm carbon rudder control rod and metal rudder pitch bell crank to further improve the rudder locking effect and controllability. 
● New style battery mounting platform to strengthen frame as well as provide mount for electronic speed controller. 
● New style lower CG landing gear. 
● Newly styled aerodynamically canopy for the ultimate fit, making the helicopter stand out. 
● Best tail gear ratio to minimize vibration caused by high speed operation of main blades, bringing the best tail locking power.
● High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.



Specification of the Trex 500 Pro DFC :
● Length: 868mm
● Height: 275mm
● Main Blade Length: 425mm
● Main Rotor Diameter: 978mm
● Tail Rotor Diameter: 206mm
● Motor Drive Gear:12T
● Main Drive Gear:134T
● Autorotation Tail Drive Gear: 145T
● Tail Drive Gear: 36T
● Drive Gear Ratio: 1:11.17:4.03
● Weight(With Motor): 1210g 

Introduction of the 3GX 3-Axis Gyro System 
:

● Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts.
● 3GX is currently the smallest and lightest flybarless system on the market. Two ports to directly connect Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system.
● Based on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate system currently on the market including 90, 120, 135, and 140 degrees swashplates.
● Graphical illustrated instruction on the computer setup software directs the user through a step by step setup process, allowing for quick setups without omitting any steps.
● Support Bluetooth connectivity. With the soon to be released Bluetooth connectivity kit, 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps allowing live adj ustments to 3GX without powering down.
● With 3GX's built in Align RCE-G600 governor function, no external governor is needed to reduce electronic wire clutters.
● A library of pre-configured 3GX settings specifically available for T-Rex series of helicopters, allowing pilots to achieve the most optimal setup for their helicopters.
● Three levels of flight mode is available on the 3GX to provide different feels from beginners to advanced pilots.
● Custom parameters have been opened up in 3GX to allow pilots to fine tune numerous settings for swashplate and rudder. Settings export feature allows custom settings to be shared amongst friends.
● 3GX utilizes brand new gyroscope sensors of the highest specifications when compared to other flybarless systems currently on the market, allowing it to be used under harsh conditions. Dual axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared to last generation 3G. This is clearly noticeable in stable hover as well as highly aerobatic routines.
● Suitable for helicopter of all class from 200 to 700, glow engine or electric powered. The superior vibration resistant characteristic is evident even when mounted with harder double sided mounting tape.
● 3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a dramatic stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.
● With built in pirouette compensation function, 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips type of maneuvers are easily accomplished with precision.
● 3GX's rudder control is similar to the high end GP-780 gyro in that rudder sensitivity is catered specifically for the helicopter's rudder response characteristics, allowing consistent rudder feel even under high speed conditions. This excellent control feel will allow pilot of all skill levels to experience the perfect integration between 3GX and helicopter.
● Additional peripherals planned for the 3GX includes 3-axis accelerometer, 3-axis magnetic compass, and GPS positioning system. While the commonly available position hold gyro system utilizes only 6 sensors, 3GX’s total of 10 sensors ensure positioning of helicopter with superior accuracy, providing the ultimate solution for aerial photography or other special purposes. 

Specification of the 3GX 3-Axis Gyro System :
● Operating Temperature:-10~60 degree
● X and Y axis Operating Angle Range:-300~+300 degree
● Z axis Operating Angle Range:-600~+600 degree
● Size:36.5x25.2x15.6 mm Size 
● Weight11g Weight
● Supports Wide/Narrow Bandwidth Digital and brushless servos
● Spektrum and JR Satellite antennas support (Replaces original factory receiver)
● Futaba S.BUS system support
● Built in governor function
● Maximum working voltage:8.5V
● Compatible with 1024/2048 resolution Spektrum receivers 
● Supports 90/120/135/140 CCPM swashplates
● Field setup without the use of a PC
● Compatible with 2 to 5 blades rotor heads
● Support up to 6 servos
● Automatic servo type recognization 

Users must have a certain concept of security to operate the R/C helicopters. 
Be sure to read and comply with related safety notes of instruction manual before flying.


Focus Shot 1 ( Equipped with the low CG DFC rotor head, exhibits exhilarating 3D performance and unimaginable flight speed,New 500DFC CCPM Metal Swashplate and metal main shaft bearing block )
Focus Shot 2 ( Newly designed electronic equipments and ESC mount )

Focus Shot 3 ( Unique carbon composite technology which effectively strengthen the weak areas and simplify electronics installation ) 
Focus Shot 4 ( Uses high precision slant tooth (helical) main gear, with higher load sustainability and lower noise output )
Focus Shot 5 ( Newly Metal Anti Rotation Bracket )
Focus Shot 6 ( Newly designed Gyro and Receiver mount ) 
Focus Shot 7 ( Brand new carbon tail control pushrod assembly ) 
Focus Shot 8 ( High efficiency shaft tail drive system,High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly ) 
Focus Shot 9 ( 500MX Brushless Motor(1600KV) ) 
Focus Shot 10 ( 425 3G Carbon fiber blades ) 
Focus Shot 11 ( DS515M Digital servo ) 
Focus Shot 12 ( DS525M Digital servo ) 
Focus Shot 13 ( 3GX Flybarless System ) 
Focus Shot 14 ( RCE-BL70G Brushless ESC ) 


Included Accessories : 
● T-REX 500PRO DFC Kits Set X 1 
● 3GX Flybarless System X 1 set
● 425 3G Carbon fiber blades X 1
● 500MX Brushless Motor(1600KV) X 1
● DS515M Digital servo X 3
● DS525M Digital servo X 1 
● RCE-BL70G Brushless ESC X 1

Radio transmitter and electronic equipment required for assembly:
● Transmitter (7-channel or more, helicopter system)
● Receiver (7-channel or more)
● 6S Li-Po 2600 ~ 4600mAh X 2 (3300mAh suggestion)
● Digital Pitch Gauge
Recenze uživatelů
Zeptejte se na produkt:

Pokud výše uvedený popis není pro Vás dostačující, zašlete nám dotaz na tento produkt. Odpovíme Vám co nejdříve.

E-mail:
Pro zaslání objednávky je nutné vyplnit toto pole.
Dotaz:
Pro zaslání objednávky je nutné vyplnit toto pole.
označená pole - Pro zaslání objednávky je nutné vyplnit toto pole.- jsou povinná
Doporučte ten produkt:

Pokud chcete informovat známého o produkte, který si myslíte, že může mít zájem, použijte níže uvedený formulář.

Do:
Pro zaslání objednávky je nutné vyplnit toto pole.
Můžete zadat i více e-mailových adres, oddělte je čárkami
Podpis:
Pro zaslání objednávky je nutné vyplnit toto pole.
Obsah:
Pro zaslání objednávky je nutné vyplnit toto pole.
označená pole - Pro zaslání objednávky je nutné vyplnit toto pole.- jsou povinná
IdoSell Trusted Reviews
5.00 / 5.00 15 reviews
IdoSell Trusted Reviews
2020-02-19
Sprawna szybka obsługa towar ok.
2020-03-03
Super G
This page uses cookie files to provide its services in accordance to Cookies Usage Policy. You can determine conditions of storing or access to cookie files in your web browser.
Close
pixelpixelpixel