Informacje o produkcie

Helikopter rc T-REX 800E PRO DFC Super Combo

  • Zdalnie sterowany helikopter rc T-REX 800 E PRO DFC Super Combo
Helikopter rc T-REX 800E PRO DFC Super Combo
Producent: ALIGN
Kod produktu: RH80E03X
Ocena: 5/55.00 / 5 (1 opinia)
Brak w magazynie
8665.00 / 1szt.
Out Of Stock


TREX 800E PRO DFC Super Combo - Align-Heli-RH80E03XW

Features of the TREX 800E PRO DFC :
The T-REX 800E PRO DFC is an 800 class flagship designed specifically for 3D flights. The CCPM direct connect servo design, coupled with DFC rotor head assembly, results in fast, precise, and more direct control reaction. The frame material integration technology is utilized on the landing gears and vertical tail fin, creating a unique look not only making the T-REX 800E PRO DFC stand out, but also resulting in an innovative design that encompasses structure rigidity along with beautiful aesthetics.

Nothing was spared in the electronics components of the kit: The mighty power of the 850MX(490KV) motor paired with Castle Edge HV 160 speed controller for unparalleled power output; The new CNC machined aluminum cased BL800H brushless high voltage cyclic servos paired with BL850H rudder servo not only exhibited top of the line servo aesthetics, but also combine heat sink function and best performance in the market segment.

The T-REX 800E PRO DFC can be described as the current top of the line flagship representing Align’s superior product line. Based on the pedigree of pure 3D flight, the newest design concept with absolute top of the line equipment, along with superior aesthetics and attractive lines, the T-REX 800E PRO DFC will definitely elevate the adrenaline in your blood!

Specification of the Trex 800E PRO DFC :
● Length : 1490mm
● Height : 402mm
● Width : 204mm
● Main Blade Length : 780mm
● Main Rotor Diameter : 1740mm
● Tail Rotor Diameter : 301mm
● Motor Drive Gear : 12T
● Main Drive Gear : 112T
● Autorotation Tail Drive Gear : 104T
● Tail Drive Gear : 22T
● Drive Gear Ratio : 1 : 9.33 : 4.37
● Weight (With Motor) : 4100g 

Introduction of the 3GX 3-Axis Gyro System 
●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts.
●3GX is currently the smallest and lightest flybarless system on the market. Two ports to directly connect Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system.
●Based on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate system currently on the market including 90, 120, 135, and 140 degrees swashplates.
●Graphical illustrated instruction on the computer setup software directs the user through a step by step setup process, allowing for quick setups without omitting any steps.
●Support Bluetooth connectivity. With the soon to be released Bluetooth connectivity kit, 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps allowing live adjustments to 3GX without powering down.
●With 3GX's built in Align RCE-G600 governor function, no external governor is needed to reduce electronic wire clutters.
●Custom parameters have been opened up in 3GX to allow pilots to fine tune numerous settings for swashplate and rudder. Settings export feature allows custom settings to be shared amongst friends.
●3GX utilizes brand new gyroscope sensors of the highest specifications when compared to other flybarless systems currently on the market, allowing it to be used under harsh conditions. Dual axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared to last generation 3G. This is clearly noticeable in stable hover as well as highly aerobatic routines.
●Suitable for helicopter of all class from 250 to 800, glow engine or electric powered. The superior vibration resistant characteristic is evident even when mounted with harder double sided mounting tape. ●3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a dramatic stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.
●With built in pirouette compensation function, 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips type of maneuvers are easily accomplished with precision.
●3GX's rudder allows consistent rudder feel even under high speed conditions. This excellent control feel will allow pilot of all skill levels to experience the perfect integration between 3GX and helicopter.
●Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position as well as altitude, and even autonomous way point flights as well as return home.

Specification of the 3GX 3-Axis Gyro System :
● Operating voltage range : DC 3.5V ~ 8.4V
● Operating current consumption : <80mA @4.8V
● X and Y axis Operating Angle Range : -300~+300 degree
● Z axis Operating Angle Range : -600 ~ +600 degree
● Sensor resolution : 12bit
● Supports 90 / 120 / 135 / 140 CCPM swashplates
● Spectrum and JR Satellite antennas support (Replaces original factory receiver)
● Futaba S.BUS system support
● Supports Wide/Narrow Bandwidth Digital and brushless servos
● Compatible with 2 to 5 blades rotor heads
● Built in governor function
● Maximum working voltage : 8.5V
● Compatible with 1024 / 2048 resolution Spektrum receivers 
● Field setup without the use of a PC
● Support up to 6 servos
● Automatic servo type recognition 
● Operating Temperature : -20 ~ 60 degree 
● Operating Humidity : 0% ~ 95%
● Size : 36.5 x 25.2 x 15.6 mm Size 
● Weight : 11g

Users must have a certain concept of security to operate the R/C helicopters. 
Be sure to read and comply with related safety notes of instruction manual before flying.

Equipped with the low CG DFC rotor head, exhibits exhilarating 3D performance and unimaginable flight speed
850MX inherit from the previous 800MXs feature, high efficiency, superior power, excellent torque, low current draw and low temperature. It’s capable of maintaining much more consistent torque and head speed through continuous 3D maneuvers, which is particularly special design for 3D flights.

New style swash anti-rotation guide with embedded anti-wear material, effectively minimize the wear between swashplate long ball and guide.
The shapely Reinforcement plate and brace are special design for T-REX 800E, effectively increase the torsional strength of main frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from its structure, thenew CNC machined aluminum electroplate red, is particular arranged in groups of 850MX motor, subtly bring the T-REX 800 stylish and metal beauty.
Equipped with new high strength cnc m1 helical main gear and tail drive bevel gear assembly, featuring reinforced overall gear structure and increased gear thickness, effectively improves gear's anti torsion ability to prevent gear from deforming under extreme power,reducing gear wear and power loss.
Utilizes composite carbon material integration technique on frame structure for CCPM servos. Brand new CCPM direct servo linkage design.
Innovative composite of fiber material for landing gear, unique stylish shape, functional intensity and visual beauty are both innovative design. 
Using competitive material and special imbedded technology for vertical tail, enhanced its structural strength and boutique texture efficiently, vivacious color providing excellent visibility.
Using competitive material and special imbedded technology for vertical tail, enhanced its structural strength and boutique texture efficiently, vivacious color providing excellent visibility.
Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.
Standard equipment : 
● Castle EDGE HV 160 Brushless ESC
● 850MX Brushless Motor (490KV)
● BL850H High Voltage Brushless Servo
● BL800H High Voltage Brushless Servo x 3
● 3GX Flybarless system

Included Accessories : 
● T-REX 800E PRO DFC Kits Set x 1
● 3GX Flybarless system x 1 set
● 780 Carbon Fiber Blades x 1 set
● BL800H High Voltage Brushless Servo x 3
● BL850H High Voltage Brushless Servo x 1
● 3K Carbon Fiber Tail Boom x 1
● 850MX Brushless Motor (490KV) x 1
● Castle EDGE HV 160 Brushless ESC x 1
● 115mm 3K Carbon Fiber Tail Blades x 1 set

Radio transmitter and electronic equipment required for assembly:
● Transmitter (7-channel or more, helicopter system)
● Receiver (7-channel or more)
● 6S Li-Po 4500 ~ 5200mAh x 2 
● 2S Li-Po 1900 ~ 2300mAh x 1 
● Dial Pitch Gauge 

Opinie użytkowników
Ilość opinii: 1 Średnia ocena: 5.00
Ocena: Ocena: 5
Model lata świetnie. Wprowadza w całkiem inny wymiar. Aż chce się pakiety ładować. Dobrze spasowany i godny polecenia.
Zapytaj o produkt:

Jeżeli powyższy opis jest dla Ciebie niewystarczający, prześlij nam swoje pytanie odnośnie tego produktu. Postaramy się odpowiedzieć tak szybko jak tylko będzie to możliwe.

To pole jest wymagane do złożenia zamówienia.
To pole jest wymagane do złożenia zamówienia.
pola oznaczone - To pole jest wymagane do złożenia zamówienia. - są wymagane
Poleć ten produkt:

Jeżeli chcesz poinformować swojego znajomego o produkcie, który Twoim zdaniem może go zainteresować, skorzystaj z poniższego formularza.

To pole jest wymagane do złożenia zamówienia.
Możesz podać więcej adresów e-mail, rozdzielając je przecinkami
To pole jest wymagane do złożenia zamówienia.
To pole jest wymagane do złożenia zamówienia.
pola oznaczone - To pole jest wymagane do złożenia zamówienia. - są wymagane
Strona korzysta z plików cookie w celu realizacji usług zgodnie z Polityką dotyczącą cookies. Możesz określić warunki przechowywania lub dostępu do cookie w Twojej przeglądarce.